Brushes of nylon or stainless steel round or flat, in 1" and 2" sizes are available as initial installation kits or as individual items for replacements.
*An economical solution compared to messy manual lubrication or a high
cost, fully automated lube system.
*A complete oil lubrication system with optional accessories and remote installation kits for single point or up to four points.
*Easy to check operating status.
*Oil volume quickly adjustable by the mode setting.
*Simple to refill the spill-proof oil reservoir.
*Oil reservoir is compatible with most synthetic oils and chemicals (see usermanual for specifics).
The ECO Oil series units in three sizes - 60cc, 120cc and 240cc - are user fillable, but not reusable once all of the oil has been dispensed. They can serve only a single bearing. These units can be fitted with a reusable NRV (non-return valve), or installed upside down without a valve.
The ECO will fit in smaller spaces, and is very easy to install and programme.
All component parts of the ECOs are recyclable.
The Technolube refillable OL500 Oil Lubricator consists of the main body with a vertical self-priming pump controlled by the microprocessor, a 500cc oil reservoir, and a battery pack. The product delivers precise, very small amounts of lubricant with a selectable intermittent dispensing cycle. Output volume is adjustable from 0.70cc to 33.4cc/day, equivalent to the service period of Half month to 24 months for the 500cc oil reservoir. It can supply up to 4 feeds by using optional installation kits. Lifetime of the machine is 5 years or more depending on usage and ambience.
PLEASE NOTE: The Technolube OL500 is a user-refillable electro-mechanical unit, but the battery pack MUST be replaced when each dispensing period set is completed.